Final Year Project (FYP) Progress Report - UniKL BMI

  TECHNICAL PAPER AND THESIS SUBMISSION                 For the week, I've completed the technical paper and thesis to be submitted it to my academic supervisor and FYP Representative (Section). Before the semester ends, I would like to thank my supervisors for the guidance and helping me throughout this semester and to successfully complete my FYP tasks. A lot of thanks also to my friends for helping and supporting me. Last but no least, I am grateful to Allah SWT for the strength toward completing FYP successfully. 

      PRESENTATION AND DEMONSTARTION DAY   This week, a presentation and demonstration day was conducted at Gemilang Hall. Attendance is compulsory for all FYP 2 and IFYP2 students.    Date: 25 May 2022 Time: 9.30 – 4.30 pm Venue: Gemilang Hall The presentation started at 9.30 AM following the FYP2 schedule. A total of 5 students in a team with two assessors from the Electronic session. I was in Team 5 along with my friends. The presentation went smoothly.  My team assessors were:          1. Ts. Mohd Aswadi Alias       2. Dr. Muhammad Ghazali Abdul Rahman The bunting that I have prepared: 

    CLAIM AND DOCUMENTATION  BY: MR. MOHAMAD SHAHRUL BIN OSMAN    This week, a workshop was conducted via Microsoft Teams. Attendance is compulsory for all FYP 1, FYP 2 and IFYP students. The workshop was conducted by Mr. Mohamad Shaiful Bin Osman.   Date: 18 May 2022 Time: 2.30 pm – 4.30 pm Venue: Online - Microsoft Teams In the workshop, Mr. Shaiful has briefed us about: ·           Documentation for claim  ·           Progress report, proposal report and etc.  ·           How to upload documents  At the end of the workshop, students will be able to: ·           Understand how to do documentation for the claim  ·           The way how to upload the documents   

     TECHNICAL PAPER PREPARATION BY: MRS. DR PUNITHAVATHI D/O THIRUNAVAKKARASU    This week, a workshop was conducted via Microsoft Teams. Attendance is compulsory for all FYP 2 and IFYP 2 students. The workshop was conducted by Mrs. Dr Punithavathi D/O Thirunavakkarasu    Date: 11 May 2022 Time: 2.30 pm – 4.30 pm Venue: Online - Microsoft Teams In the workshop, Dr. Punithavathi has briefed us about: ·           Preparation technical paper and format of technical paper ·           Discussion tip and tricks of technical paper ·           Open Question for final slide preparation FYP 1, FYP 2 and FYP Diploma At the end of the workshop, students will be able to: ·           Understand the importance of writing a good technical report and format of technical paper ·   ...

  TROUBLESHOOTING     When doing testing, errors often occur. Following are the common problems that are often encountered when testing onto prototype is performed.  Figure above shows that network error is happened in Mobaxterm. This is because the IP address of    the Raspberry Pi is not same with the IP in the command prompt. To solve this problem, I have to  make sure that the IP address in command prompt and Advanced IP Scanner is same.      As figures above show, the password to login in into the Mobaxterm is denied. This is because, during the session, I have to untick the specify username so that the session can proceed to the next step. After untick the specify username, I can enter the password successfully. The password is 182736pika.  Figures despite the problem that I had during entering the coding file. As we can see, the command is not found in the Mobaxterm to remote the prototype. The problem is the way of typing th...

  RESULT PROTOTYPE     To obtain the result, first of all connect the correct Wi-Fi and enter the password. In this case, the Wi-Fi name is "zahra" and the password is "zahra123". Next, get the IP address through the command prompt. The IP address for the Raspberry Pi is 192.168.43.100. Next, scan the Advanced IP Scanner to see whether the IP addresses are detected. If detected, the IP address will turn blue, but if not, it will not pop-up. In the Mobaxterm, after running the session, a login is successful, 'python baby.py' is typed to call out the coding to run the coding. The sound-detected LED will blink and when the baby cry, the camera will capture the image of the baby and the notification will be sent via e-mail.  Figure 1: Choose Wi-Fi and enter password Figure 2: Command Prompt used to obtain the IP address Figure 3: The status of Raspberry Pi in the Advanced IP Scanner turns to blue  Figure 4: Enter the password to open the coding in the Mobaxterm...

      PRESENTATION AND DEFENSE PROPOSAL  BY: MRS. AZLIZA BINTI MOHAMAD ARSHAD   This week, a workshop was conducted via Microsoft Teams. Attendance is compulsory for all FYP 1, FYP 2 and IFYP students. The workshop was conducted by Mrs. Azliza Binti Mohamad Arshad    Date: 20 April 2022 Time: 2.30pm  – 4.30 pm Venue: Online - Microsoft Teams In the workshop, Madam Azliza has briefed us about: ·           Preparation slide presentation and documentation ·           Tips and tricks of presentation  At the end of the workshop, students will be able to: ·           Understand how to prepare slide presentation and documentation. ·           Write with care and attention to detail. ·           Submit the draft to the super...

    THESIS WRITING AND PROPOSAL WRITING WORKSHOP (CHAPTER 4 AND 5) BY: MR. AZMI BIN HASHIM    This week, a workshop was conducted via Microsoft Teams. Attendance is compulsory for all FYP 1, FYP 2 and IFYP students. The workshop was conducted by Mr. Azmi Bin Hashim.   Date: 06 April 2022 Time: 2.30 pm – 4.30 pm Venue: Online - Microsoft Teams In the workshop, Mr. Azmi has briefed us about: ·           Result and discussion (Chapter 4), and Conclusion (Chapter 5) ·           Abstract in thesis writing or summary in proposal report At the end of the workshop, students will be able to: ·           Understand the importance of writing a good final report for FYP 2 ·           Understand how to write a detailed result, discussion, conclusion and abstract for a proposal. ·   ...

      SOFTWARE EMBEDDED IN PROTOTYPE      This week, I continued the project by installing the software into the prototype. All figures below describing the software embedded to the prototype.  Figure 1: Raspberry Pi is successfully remote using Mobaxterm  Figure 2:  Advanced IP Scanner is used to get the IP address of Raspberry Pi Figure 3: Raspberry Pi Imager is installed to remote the Raspberry Pi Camera  Figure 5: Raspberry Pi successfully turn on and the camera is installed  Figure 6: All library listed are successfully install into the Raspberry Pi 

  THESIS WRITING WORKSHOP (CHAPTER 1,2, AND 3) BY: MR. SHAH RIZAILLI MUKHTAR    This week, a workshop was conducted via Microsoft Teams. Attendance is compulsory for all FYP 1, FYP 2 and IFYP students. The workshop was conducted by Mr. Shah Rizailli Mukhtar.   Date: 23 March 2022 Time: 2.30 pm – 4.30 pm Venue: Online - Microsoft Teams In the workshop, Mr. Shah has briefed us about: ·           Introduction (Chapter 1), Literature Review (Chapter 2), and Methodology (Chapter 3) ·           Recommendation on technical writing At the end of the workshop, students will be able to: ·           Understand the importance of writing a good technical report proposal for FYP 1 ·           Understand how to write a detailed introduction and literature review chapter for a technician proposal · ...

  ASSEMBELING THE COMPONENTS     This time, I assemble all of the purchased items. Here an overview, front view and circuit inside the casing by referring to schematic diagram.  Figure 1: Overview of the project       Figure 2: Front view of the prototype  Figure 3: View inside the casing                                                             

       SCHEMATIC DIAGRAM     Fritzing is an open-source hardware initiative that democratises the use of electronic as a creative material. They provide a software application, a community website and services in the spirit of Processing and Arduino, building a creative ecosystem that enables users to document prototypes, share them with others, teach electronics in the classroom, layout and manufacture professional PCB.  Figure 1: Logo of Fritzing  A basic system circuitry was developed in Fritzing software for this project. A   view   of   schematic   diagram   for this   project   shown   in  figure below.  Figure 2: Schematic Diagram of the project As shown in Table 1, the concept of this project only using three main hardware, Raspberry Pi 4 Model B, Raspberry Pi Camera and LM393 sound sensor. The following table shows all the connection for this project. No. LM393 ...

  INTRODUCTORY FYP2 BRIEFING  BY: MR. MOHAMAD SHAIFUL BIN OSMAN  The introduction briefing for FYP 2 was conducted via Microsoft Teams for the second week.  Attendance is required for all FYP 2 and IFYP students. The workshop  was led by Mr. Mohamad Shaiful Bin Osman.  Date: 02 March 2022 Time: 2.30 pm – 4.30 pm Venue: Online - Microsoft Teams During the workshop, Mr. Mohamad Shaiful informed us of: The course code of FYP2 (BPB49906) must be correct. From Week 2 until Week 5 students are allow to make change of title of the final year project if they need to do so.  The evaluation of FYP 2 are project final report, thesis paper, project presentation and project progress report (logbook or blog).  FYP 2 activities for this semester.

  PURCHASING COMPONENTS            I continued FYP 2 in the first week of this semester by developing the project prototype. My first step was to purchase the project materials. To increase efficiency, several changes have been made from what was recommended in FYP 1. The Raspberry Pi 4 Model B, LM393 sound sensor, and Raspberry Pi Camera are among them.  SPECIFICATION OF RASPBERRY PI 4 MODEL B   Processor: Broadcom BCM2711, quad-core Cortex-A72 (Arm v8) 64-bit Memory: 1GB, 2GB or 4GB LPDDR4 (depending on model) Connectivity: 2.4 GHz and 5.0GHz IEEE 802.11. b/g/n/ac wireless LAN, Bluetooth 5.0, BLE                        Gigabit Ethernet, 2 x USB 3.0 ports, 2 x USB 2.0 ports GPIO: Standard 40-pin GPIO header Video & Sound: 2 x micro-HDMI ports, 2-lane MIPI DSI display port, 2-lane MIPI CSI     ...

  PROPOSAL REPORT AND PROGRESS REPORT SUBMISSION For the week, I've completed the proposal report and submitted it to my academic supervisor. After the submission, I''ll continue to study and do research on how to improve and complete my project. This blog will continue for the next semester for my Final Year Project 2 (FYP 2). Before the semester ends, I would like to thank my supervisor for the guidance and helping me throughout this semester and to successfully complete my FYP 1 tasks. A lot of thanks also to my friends for helping and supporting me. Last but no least, I am grateful to Allah SWT for the strength toward completing FYP 1 successfully. 

PROPOSAL REPORT PROGRESS  CHAPTER 3 This week, I was able to complete the methodology for my project. The methodology contains components, datasheet of components, block diagram, and a flowchart. I also updated the gantt chart according to the latest progress.  Figure 1 show the Gantt Chart for FYP1   

  PROPOSAL REPORT PROGRESS  CHAPTER 2 This week, I was able to complete the literature review for my project. The literature review contains of baby crying detection based on sound, baby crying detection based on baby movement, previous studying baby's voice recognition and literature review on signal deliver using IOT through message and voice. 

  PROPOSAL REPORT PROGRESS  CHAPTER 1  This week, I was able to complete the introduction for my project. The introduction contains background of the project, problem statement, objectives of the project, significance of the project and scope and limitation of the project. 

  CLAIM AND DOCUMENTATION  BY: MR. MOHAMAD SHAHRUL BIN OSMAN    This week, a workshop was conducted via Microsoft Teams. Attendance is compulsory for all FYP 1 students. The workshop was conducted by Mr. Mohamad Shahrul Bin Osman.   Date: 10 November 2021 Time: 2.30 – 4.30 pm Via: Microsoft Teams In the workshop, Mr. Shahrul has briefed us about: ·           Documentation for claim  ·           Progress report, proposal report and etc.  ·           How to upload documents  At the end of the workshop, students will be able to: ·           Understand how to do documentation for the claim  ·           The way how to upload the documents   

  PROPOSAL DEFENSE DAY   This week, a proposal defense day was conducted via Microsoft Teams. Attendance is compulsory for all FYP and IFYP1 students.    Date: 03 November 2021 Time: 2.30 – 4.30 pm Via: Microsoft Teams The presentation started at 2:15 PM following the FYP1 schedule. A total of 4 students in a team with two assessors from the Electronic session. I was in Team 5 along with my friends. The presentation went smoothly.  My team assessors were:          1. Prof. Dr. Mohd Amir Abas      2. Dr. Muhammad Ghazali Abdul Rahman From the presentation, there were few recommendations on how to improve my project as recommended by the assessors.  The slide presentation that I have prepared: