WEEK 9

 

RESULT PROTOTYPE

    To obtain the result, first of all connect the correct Wi-Fi and enter the password. In this case, the Wi-Fi name is "zahra" and the password is "zahra123". Next, get the IP address through the command prompt. The IP address for the Raspberry Pi is 192.168.43.100. Next, scan the Advanced IP Scanner to see whether the IP addresses are detected. If detected, the IP address will turn blue, but if not, it will not pop-up. In the Mobaxterm, after running the session, a login is successful, 'python baby.py' is typed to call out the coding to run the coding. The sound-detected LED will blink and when the baby cry, the camera will capture the image of the baby and the notification will be sent via e-mail. 

Figure 1: Choose Wi-Fi and enter password

Figure 2: Command Prompt used to obtain the IP address

Figure 3: The status of Raspberry Pi in the Advanced IP Scanner turns to blue 

Figure 4: Enter the password to open the coding in the Mobaxterm 

Figure 5: Coding is run and the notification is sending 

Figure 6: Notification send to the caretaker via-email